HM6 Series Desktop System with CCD Screw tighten machine
Categories Desktop type System Album View larger image Brand SAMTRONIK Model HM6-GH5331 Dimension size 680*650*745mm Power supply AC 220V 50HZ Running speed 500mm/s XYZ screw range 500*300*300*100mm Screw lock products size 280*260mm Update Time 2021-03-07 Detail InformationDesktop Screw Robot with CCD optionIntroduction:
The biggest advantage for desktop type automatic locking screw machine is flexible and high efficiency. According to the set coordinates, machine automatically lock products.The Z axis can be installed at most four lock electric screwdriver at the same time , greatly improve production efficiency.For replacement products, just change coordinates point can be lock.The operation is very simple.Distribution system screw through tracheal pressure send screw to the screwdriver bits .The manipulator automatically lock according to the set coordinates .
Fatures:
1, Strong commonality.Small volume, can cooperate with production line operation, convenient replacement products. According to coordinates setting , and also can be read CAD document complete setting .
2, the Z axis can be installed at most four lock electric screwdriver at the same time pay, greatly improve production efficiency.For replacement products, just change coordinates point can be lock .
3, Y axis can according to need to make double location ( double Y axis), the operator can alternate products up and down.
4 ,Suitable screw specification L≥1.2 D (D = screw head diameter, L = length of screw thread) conforms to the condition screw are available this desktop blowing type automatic locking screw machine.
5, this Automatic screw feeding machine available for similar size screw length is + / - 5 mm .
Specification:
Machine construction
Machine dimension:
680*650*745mm (according to products size)
XYZ Dimension:
X:500mm Y1:300mm Y2:300mm Z:100mm
Voltage:
AC 220V 50HZ
Power:
About 500W
Temp :
-20℃-40℃
Frame:
Aluminum alloy high strength structural movement platform
Conveying way:
Linear guide module+lead screw+Servo motor driven
Screw feeding way
HM3 feeder + tighten gripper+chunk+screwdriver bits
Screw lock speed:
1.5-2.2S/pcs (not included load &unload time)
Max running speed:
500mm/s
Control system
Main control program
Panasonic PLC
HMI
Touch Screen
Program input
Teaching input
I/O Signal
8INPUT/8OUTPUTS
Communication
serial port RS232C
Program storage
50 group(according to customer request edit program,program free switch)
Posistion precision
Precision request
X,Y,Z:+/-0.05mm
Z:+/-0.02mm;
Screwdriver
Screw drvier
HOIS /KILEWS
Torque
1-5.5kgf.cm
Screw feeder
Feeder model
HM3 Mechanical blow type feeder
Application
XYZ screw range
500*300*300*100mm
range
Screw lock
280*260mm
products size
Products&fixture size
According to customer products size
Detection
Screw slip detection
Yes
Screw leakage detection
Yes
NG Screw tighen detection
Alarm light + buzzer on
CCD
Option
Please send your message to usNavigation- Keep Up To DateCopyright © 2021 Samtronik International Limited Support By BEE Cloud