- HR6-P331 Desktop Screw driving robotDetail Information
HR6-P331 Desktop Screw driving robot
Adopts vacuum suction screw method, high universality, overcome the blowing screw can't send the screw length diameter ratio less than 1.2mm, also overcomes the disadvantage of magnetic suction way can’t suction stainless steel screw . for M1.0 - M4.0 screws all can be applied, such as screw size changed, just need to change the suction nozzle.
1.Applies to most of the screws, strong commonality, the screw length to diameter ratio and material there is no requirement.
2.Can replace artificial specific screw lock pay operations, realizing mechanization production.Reduce the labor intensity of workers.The traditional manual screw placement, and alignment of the screw head need to work takes up a lot of time and energy.
3.Do not need to match the external computers , convenient installation.Setting operation is simple, the staff quickly master the operation skill and debugging.
4. Apply to mobile phones, digital products, photoelectric, health care, small household electrical appliances.
480(W) x 520(H) x 680(D) mm （according to products size）
X:250mm Y:250mm Z:100mm
AC 220V 50HZ
Euro standard Aluminum alloy high strength structural movement platform
Linear guide module+synchronous belt+ Closed loop motor drive module
Screw feeding way：
HM3-A1 screw feeder + HC4 tighten gripper+screwdriver bits + HE5 screwdriver head
Screw lock speed：
1.2-1.8S/pcs (not included load &unload time)
Max running speed：
Main control program
Panasonic PLC Control
serial port RS232C /USB
10-20 group(according to customer request edit program, free switch)
XYZ lock range
Screw lock products size
180*200*100mm (Depends on products)
According to customer products size
Screw slip detection
Screw leakage detection
NG Screw tighen detection
Alarm light + buzzer onNavigation
- Keep Up To Date