- Home > Products > Floor stand type system >
HM9-Z550KQ-Fully Automatic Screw lock machine with Self feeding screw system
HM9-Z550KQ-Fully Automatic Screw lock machine with Self feeding screw system
Categories Floor stand type system Album View larger image Brand SAMTRONIK Model HM9-Z550KQ Machine dimension 1150*1220*1750mm XYZ Dimension: X:500mm Y:500mm Z:100mm I/O Signal 8INPUT/8OUTPUTS XYZ lock range According to customer products size Screw slip detection Yes Update Time 2021-03-07 Detail InformationHM9-Z550KQ-Fully Automatic Screw lock machine with Self feeding screw system
Introduction:
Automatic screw lock machine with self feeding screw systemFeatures:
1.Used to finished product assembly screws locking , ensure the products good packaging function
2.Adopt Japan BM6-Z lock module+Directly intelligent screening feeder.
3.Machine automatic finished locking screw according to pre-set coordinate.
4.Replacement products just need modifty PLC lock point coordinates ,
5.High first pass yield and precision ,Lock screw quality is stable and reliable,
6.Auxiliary function: screw slip detection, screw lock leakage detection,
7.Screw floating lock detection, bad screw statistics, screw in detection
8.CCD visual programming function, to ensure good accuracy and convenience
9.With HJ-HSF-50Nservo electricdriver system
Specification:
Machine
constructionMachine dimension:
About 1150*1220*1750mm(according to products size)
XYZ Dimension:
X:500mm Y:500mm Z:100mm
Voltage:
AC 220V 50HZ
Power:
about 750W
Temp :
-20℃-40℃
Frame:
Steel plate + rectangular tube +aluminum alloy frame
Conveying way:
Lead screw robo cylinder+servo motor+Electricaland pneumatic combination
Screw feeding way:
BM6-Z self-feedig
Screw lock speed:
1.5-2.5 sec/time;(Depends route and screw length)
Max running speed:
500mm/s
Control system
Main control program
PLC Control
HMI
Touch screen
Program input
Coordinate input or Teaching input
I/O Signal
8INPUT/8OUTPUTS
Communication
Serial port RS232C
Program storage
50 group (according to customer request edit program,program free switch)
Posistion
precisionPosition precision
PANASONICS servo motor +Driver X,Y:+/-0.05mm
PANASONICS servo bake motor+Driver(option) Z:+/-0.02mm
Screwdriver
Screwdriver model
HJ-HSF-50N
Torque
3-5kgf.cm
Screw feeder
Feeding module model
BM6-Z
Application
rangeXYZ lock range
According to customer products size
Z axis lock range
0-100mm.Special dimension need customize
Screw lock
products sizeAccording to customer products size
Products&fixture size
According to customer products size
Detection
Screw slip detection
Yes
Screw leakage detection
Yes
NG Screw tighen detection
Alarm light + buzzer on
Optional
CCD
Teaching assitant position
Please send your message to usNavigation- Keep Up To DateCopyright © 2021 Samtronik International Limited Support By BEE Cloud