HM9-Fully Automatic Screw lock machine with Self feeding screw system

Categories	Floor stand type system
Trademark/Brand	SAMTRONIK
Model	HM9
Machine dimension	115012201750mm
XYZ Dimension:	X:500mm Y:500mm Z:100mm
I/O Signal	8INPUT/8OUTPUTS
XYZ lock range	According to customer products size
Screw slip detection	Yes
Update Time	Oct 31,2025

Detail Information

Introduction:

Automatic screw lock machine with self feeding screw system

Features:

1.Used to finished product assembly screws locking , ensure the products good packaging function

2.Adopt Japan BM6-Z lock module+Directly intelligent screening feeder.

3.Machine automatic finished locking screw according to pre-set coordinate.

4.Replacement products just need modifty PLC lock point coordinates ,

5.High first pass yield and precision ,Lock screw quality is stable and reliable,

6.Auxiliary function: screw slip detection, screw lock leakage detection,

7.Screw floating lock detection, bad screw statistics, screw in detection

8.CCD visual programming function, to ensure good accuracy and convenience

9.With HJ-HSF-50Nservo electricdriver system

Specification:

Machine construction	Machine dimension:	About 115012201750mm(according to products size)
	XYZ Dimension:	X:500mm Y:500mm Z:100mm
	Voltage:	AC 220V 50HZ
	Power:	about 750W
	Temp :	-20℃-40℃
	Frame:	Steel plate + rectangular tube +aluminum alloy frame
	Conveying way:	Lead screw robo cylinder+servo motor+Electricaland pneumatic combination
	Screw feeding way:	BM6-Z self-feedig
	Screw lock speed:	1.5-2.5 sec/time;(Depends route and screw length)
	Max running speed:	500mm/s
Control system	Main control program	PLC Control
	HMI	Touch screen
	Program input	Coordinate input or Teaching input
	I/O Signal	8INPUT/8OUTPUTS
	Communication	Serial port RS232C
	Program storage	50 group (according to customer request edit program,program free switch)
Posistion precision	Position precision	PANASONICS servo motor +Driver X,Y:+/-0.05mm
Posistion precision	Position precision	PANASONICS servo bake motor+Driver(option) Z:+/-0.02mm
Screwdriver	Screwdriver model	HJ-HSF-50N
Screwdriver	Torque	3-5kgf.cm
Screw feeder	Feeding module model	BM6-Z
Application range	XYZ lock range	According to customer products size
	Z axis lock range	0-100mm.Special dimension need customize
	Screw lock products size	According to customer products size
	Products&fixture size	According to customer products size
Detection	Screw slip detection	Yes
	Screw leakage detection	Yes
	NG Screw tighen detection	Alarm light + buzzer on
Optional	CCD	Teaching assitant position