Desktop Screw driving robots system
Categories | Desktop type System |
---|---|
Brand | SAMTRONIK |
Model | HM6-G5331 |
Dimension size | 595*560*600mm |
Power supply | AC 100V-230V 50-60HZ |
Running speed | 500mm/sec (X-Y ) |
X Y axis lock range | 450*400(mm), available customized |
Z axis lock range | Available customized |
Update Time | Dec 11,2024 |
HM6-G5331 Desktop screw lock machine
Introduction:
The biggest advantage for desktop type automatic locking screw machine is
flexible and high efficiency. According to the
set coordinates, machine automatically lock products.The Z
axis can be installed at most four lock electric screwdriver at the same time , greatly improve production efficiency.For replacement products, just change coordinates point can be lock.The operation is
very simple.Distribution system screw through tracheal pressure send screw to the
screwdriver bits .The manipulator automatically lock according to the
set coordinates .
Fatures:
1, Strong
commonality.Small volume, can cooperate with production line operation, convenient replacement products. According to coordinates setting , and also can be read CAD
document complete setting .
2, the Z axis can be installed at most
four lock electric screwdriver at the same time
pay, greatly improve production efficiency.For replacement
products, just change coordinates point
can be lock .
3, Y axis can according to need to make
double location ( double Y axis), the operator
can alternate products up and down.
4 ,Suitable screw
specification L≥1.2 D (D = screw head diameter, L = length of screw thread) conforms
to the condition screw are available this desktop blowing type automatic locking screw
machine.
5, this Automatic screw feeding machine available for similar size screw length is + / - 5 mm .
Specification:
Machine
construction |
Machine
dimension: |
680*650*745mm
(according to products size) |
XYZ Dimension: |
X:500mm Y1:300mm
Y2:300mm Z:100mm |
|
Voltage: |
AC 220V 50HZ |
|
Power: |
About 500W |
|
Temp : |
-20℃-40℃ |
|
Frame: |
Aluminum alloy
high strength structural movement platform |
|
Conveying way: |
Linear guide
module+lead screw+Servo motor driven |
|
Screw feeding
way |
HM3 feeder + tighten gripper+chunk+screwdriver bits |
|
Screw lock
speed: |
1.5-2.2S/pcs
(not included load &unload time) |
|
Max running
speed: |
500mm/s |
|
Control system |
Main control
program |
Panasonic PLC |
HMI |
Touch Screen |
|
Program input |
Teaching input |
|
I/O Signal |
8INPUT/8OUTPUTS |
|
Communication |
serial port
RS232C |
|
Program storage |
50
group(according to customer request edit program,program free switch) |
|
Posistion
precision |
Precision
request |
X,Y,Z:+/-0.05mm |
Z:+/-0.02mm; |
||
Screwdriver |
Screw drvier |
HOIS /KILEWS |
Torque |
1-5.5kgf.cm |
|
Screw feeder |
Feeder model |
HM3 Mechanical blow type feeder |
Application |
XYZ screw range
|
500*300*300*100mm |
range |
Screw lock |
280*260mm |
products size |
||
Products&fixture
size |
According to
customer products size |
|
Detection |
Screw slip
detection |
Yes |
Screw leakage
detection |
Yes |
|
NG Screw tighen
detection |
Alarm light +
buzzer on |
|
|
CCD |
Option |
- Name
- Tel
- *Title
- *Content