Home > Products > Feeding system >

HM3 Drum Type Screw Feeder

HM3 Drum Type Screw Feeder

HM3 Drum Type Screw Feeder
CategoriesFeeding system
AlbumView larger image
BrandSAMTRONIK
ModelHM3
Machine dimensionL240*W460*H350mm
VoltageAC 220V 50HZ
Screw feeding wayAir-blown/suction type
Screw sizeM1--M5
Update Time2019-12-08
Detail Information
                                  HM3 Screw Feeder
Introduction 

A simple mechanism that lines up screws on the chute rail , clears screw jamming and stuck screws. This screw feeder could available for difference type screw head with spring and washer , application to products assembly line .

Features:

1. It has simple structure, high efficiency, smooth operation and low failure rate.

 

2. Using Japanese original direct vibration, it runs smoothly and can effectively deal with the layout and material distribution of various screw.

 

3. The 45 degree oblique angle is adopted to make the screw distribution smooth and steady.

 

4. Roller feeding is used for screw sorting and feeding. Intelligent screw rail feeding can effectively filter and screen foreign bodies, iron chips and irregular screw.

 

5. The barrel is easy to take and place, which can be used to clean up foreign bodies manually in time, eliminate secondary pollution and ensure product quality.

 

6. Automatically detect the status of feeding screw and timely replenish them.

 

7. The unique solution for combination screw;

 

8. Open structure is adopted, and the breakdown is clear at a glance, and the troubleshooting is convenient and fast.

Screw feeding system Details

Specification:

Machine construction

Machine dimension

L240*W460*H350mm

Machine weight

12KG

Voltage

AC 220V 50HZ

Air supply

0.4-0.6MPa

Temp :

-20℃-40℃

Electric device

SMC, KEYENCE/Panasonics Sensors, Imported Direct Vibration

Screw feeding way

Air-blown/suction type

Screw feeding speed

60/M

Control system(Option)

Main control program

Singlechip

I/O Signal

4 INPUT/2 OUTPUTS    

Application
range

Screw size

M1--M5

Screw length

6-30mm

Barrel capacity:

1200PCSM5*16mm as sample

Screw Ratio:

Blow-in type: L > 1.3D (L is the total length of the screw, D is the diameter of the screw cap)

Please send your message to us
*Email
Name
Tel
*Title
*Content

Agree to use terms of service